HB Racing将推出新车，D2 EVO 1/10竞技级2WD电动越野车(Buggy)。由设计师Torrance Deguzman开发的D2 Evo具有工厂CNC铝升级部件、碳纤维部件和合成尼龙材料，HB 1/8和1/10型号已经采用的单壳悬挂摆臂也是标准配置的。包车可以大量调节和设置的设计，提高了新车在不同赛道上的适应能力，保证了使用不同类型轮胎和不同大小轮胎的战斗力，可以在全球各种赛道和环境中比赛，第一个可以量产1000辆，产品编号204240辆。
D2 EVO特性
aluminum front arm mounts with optional adjustable kick up
mono coque suspension arms with carbon fiber inserts as pioneered by HB in 1/8 scale 1/10 4 wd
gull wing suspension arm design front rear
aluminum caster blocks with caster adjustment bushings included
adjustable ackermann geometry via optional steering hub arms
adjustable droop setting via droop screws similar to 1/8 scale buggies
ball bearing supported steering bell cranks with aluminum steering rack
flat plate aluminum chassis so optional materials like carbon fiber can be used depending on racing conditions adjustable battery position with quiity
motor cooling fan mounts built into the side guards
dual disc adjustable slipper clutch
machined aluminum gearbox with 3-gear lay down configuration
easy access differential(ball gear diff available)
aluminum rear hubs with inserts for various hinge pin heights
fully adjustable camber link position using spacers
both in board and outboard camber mounts can be finely adjusted up down as well as inward outward clamping aluminum wheel hex drives
arm mount inserts for toe-in and anti-squat adjustment
设计师托兰斯德古兹曼：
“The d 2 Evo was designed for total adjust ability . out of all The RC car racing categories，The 1/10 scale off-roaders are The most differ mono coque suspension arms which have been a staple of HB off-roaders for the past decade，and droop screws which are ubiquitous in 1/8 scade
1.《【d2】HB Racing D2 EVO 1/10 2WD月展》援引自互联网，旨在传递更多网络信息知识，仅代表作者本人观点，与本网站无关，侵删请联系页脚下方联系方式。
2.《【d2】HB Racing D2 EVO 1/10 2WD月展》仅供读者参考，本网站未对该内容进行证实，对其原创性、真实性、完整性、及时性不作任何保证。
3.文章转载时请保留本站内容来源地址，https://www.lu-xu.com/auto/3156418.html
